BMW Performance Software at ISW
Wish your BMW had a little more power? A lot more power? ISW has the solution! We’re proud to offer bootmod3 by ProTuningFreaks, the world’s first Custom Tuning Software for BMW F-Series Vehicles.
For Tuning Inquiries on non-F-Series vehicles, please contact us.
Features of BM3 (bootmod3)
- Dramatic Horsepower & Torque Gains
- Software Uploaded Directly through the OBD II Port Without Needing to Remove the DME!
- Tunes Available for all levels of modification -from completely stock to full race builds!
- OTS “Off The Shelf” Tunes Optimized for 91/93/Racegas/E85. Just set the Tune and enjoy!
- GTS Flashes Included for Vehicles with DCT!
- Mobile Application to Change Maps and View Engine Parameters such as Boost, A/F Ratios, etc. (available for Android and iPhone. Must Purchase OBD II Wifi Agent to use mobile app.)
- Improved Fuel Economy (under normal driving conditions.)
- Datalogging for over 200 diagnostic channels, up to 40 channels concurrently.
BM3 is Available for the Following Vehicles/Engines
M-Series: M2 | M3 | M4 | M5 | M6 | X5M | X6M
1 Series: 125i | 128i | 135i
2 Series: 220i | 228i | 235i |
3 Series: 320i | 328i | 330i | 335i | 340i
4 Series: 420i | 428i | 430i | 435i | 440i |
5 Series: 520i | 528i | 535i | 530i | 535i |
6 Series: 640i | 650i |
X Series: X3 | X4 | X5 | X6
Engines: N20 | N26 | N55 | S55 | S63TU
(If you are unsure if your BMW is compatible with the software, please contact us via the Contact Form above or call 732-341-3400)
Exhaust Burble Feature Using Bootmod3
Map Features
- Speed Governor Removed
- Increased Rev Limiter
- Exhaust burble (GTS, custom, aggressive mode), switchable with the steering wheel controls in efficient vs. sport mode
- GTS Startup Roar
- GTS DCT Transmission flash
- Recalibrated Sport Gauges on iDrive
- Cold start cat heat cycle and cat efficiency check removed (for off-road use)
- Maps for Upgraded Turbos
- Tunes for Race Gas, E85/blend, and Water-Meth Injection Tuning.
- Custom Throttle mapping
- Backend Flash maps for use with piggybacks such as the JB4
Learn More about bootmod3!
Send an email to info@islandsportworks.com, or call 732-341-34100 to receive pricing, gains, etc.
bootmod3 BMW Tuning Process
- We begin by connecting a charger to the vehicle’s battery to ensure your BMW’s DME is sufficiently powered throughout the flashing process.
- Next, we plug into your vehicle’s OBDII port using our BMW OBD II to E-NET cable to begin communication with the vehicle’s DME.
- We unlock the vehicle’s DME using the bootmod3 software to allow a full software reflash.
- We select the appropriate Map or “Tune” for your BMW (choices made based on Octane level, supporting modifications, etc. We can consult you on the best Tune for your vehicle.)
- We flash the selected tune onto the vehicle’s DME and take it for a test drive to ensure the tune bedded properly.